Pin Backer for PLA and Standard Filaments

Not much to describe, just a quick and easy backer for enamel and novelty pins. Other designs I found on Printables required TPU or left the pin post exposed. The fit on this model is intentionally snug to work with rigid filaments. If you find it too snug, try scaling up by 1-3% in your slicer. 

Features

• Prevents accidental stabbings!

• Rounded to avoid snags.

• Super fast print! Finishes in less than 5 minutes.

Recommended Settings

• Layer Height: 0.20 mm

• Walls: 3

• Infill: 15%

• Material: PLA/PLA+, PETG, ABS

• Supports: No

• Change Orientation: No

• Brim: No