April 4, 2026
Description
V2 - easier to mount, easier to maintenance.
Assembly:
- solder cables from "inner side" of the pins - see first image
- remove the black spacer from pins (not needed anymore)
- insert pins into holes
- slide-in the cap.
Changes to original:
- added Dupont pins for connecting servo / filament sensor
- print as original, no additional supports needed
Pins used (reverse version):
https://www.aliexpress.com/item/1005006795400618.html
License:
Creative Commons — Attribution — Noncommercial — Share Alike
7
jimmy_cr
