TS100 / TS101 adapter for the Proxxon MB200 as heat set insert press

First insert the TS101 into the MB200, then clip the adapter onto the TS101 from the back and slide both together down into the bracket. The sleeve of the TS101 must be installed since it is the actual piece where the force is transmitted.

Print in PETG with

• 0.2 mm layer height

• 3 perimeters

• 2 mm top and bottom thickness

With these settings no infill should be required (solid piece).

This model is inspired by the Pinecil adapter made by @k8y3d.