December 30, 2022
Description
The both side parts should be printed with a filament that can resist higher temperatures. I made good experience with PETG. The pads should be printed with TPU.
To mount the two parts together, two rods with a diameter of 8mm and 250mm length are required. I used simple aluminium rods. The pads I glued with double sided tape.
Optionally, four pads with a diameter of up to 28mm can be used as feet by glueing them beneath the stands.
The rough dimensions of the stand are:
I printed the stand in PETG with a 0.6mm nozzle, 5 perimeters, 0.3mm layer height, and 25% infill.
License:
Creative Commons — Attribution — Noncommercial
derebbe
