Sleek bottom load double decker beer koozie

This is a remix of the threaded version of Lazarus's Double Decker Beer Koozie for Sleek Cans (not to be confused with slim cans).

When printing paint supports on the body over hangs but not the threads.  For the top I had the best luck printing it with the thread on the print bead and again painting on supports for the overhangs but not on threads.  When I didn't the friction tabs would break off mid print.  

When printing the top and bottom I would suggest petg.  PLA is a bit to brittle (silk PLA especially so) and may break when in use.  If you use PLA use PLA flex creep to your advantage by carefully placing the top and bottom rings on a can and leaving them there for a day or so.