April 9, 2022
Description
This is replacement cover for Parallel I/O (or parallel port) of Sony PlayStation 1. I tried this on model SCPH-550X, but most likely it will be compatible with any model with parallel port (from SCPH-100X to SCPH-750X). Latch is fully working, it will properly click in place.
Printer Brand:
Creality
Printer:
Ender 3
Rafts:
Doesn't Matter
Supports:
Yes
Resolution:
0.1
Infill:
25%
Filament: FDPlast PLA Grey
Notes:
You must print it as shown (second picture) , if you put it flat on the printing bed - latch won't have any springiness and will almost immediately break along layers. I recommend to print it with standard supports, but set "Support X/Y Distance" to 0.4 mm in Cura, otherwise it won't add all necessary supports (check preview before printing). Brim (3-5 lines) is also recommended. You can print it in 0.2 resolution, too, I've only used 0.1 for cleaner surface.
License:
Creative Commons — Attribution
Kirill S
