Wingman | Apex Legends [Easy Print] w/ Stand

Build Videos
P1: https://www.youtube.com/watch?v=nPZfvoYlkRc
P2: https://www.youtube.com/watch?v=hSb7K_NrlCI
Hey everyone! This is my model of the Wingman from Apex Legends, it's pretty accurate, I've made a few videos on how I designed it and my build of it, I recommend you check it out if you plan on printing it!
I designed it to print in the fewest pieces possible with easy overhangs and bridging if you print one do post a make it would make my day!

Assembly Video: https://youtu.be/PDiCj4JRqCQ
Design Timelapse: https://www.youtube.com/watch?v=Q5mviCJdMZU

Print instructions

-Takes less than a third a roll of filament (at about 15% infill)
-Is 26cm long, scaled using in-game hand comparisons. (its a bit small in real life, but accurate.)
-For the stand, print 'stand' if your bed is large enough or print 'stand A' & 'stand B' and glue them together
[FOR SMALLER PRINT BEDS]
instead of printing "main body front Left" and "main body front right", print the 4 stls with the [Smaller Printer] prefix! Hope that helps!
AND instead of printing "Top Rail" print "[Smaller printer] Top rail" front and back, Hope that helps!
[FUSION 360 FILE ADDED]
as per request, have fun!