Prusament Spool-Based Dog Toy

Before you print this for your furry friend, you will need glue for this, also THIS IS FOR PRUSAMENT SPOOLS ONLY, OTHER SPOOLS WON'T WORK.

Print: 5x Part Connector, 1x Main Treat Holder, 1x Hole Cap Part 1, 1x Hole Cap Part 2

Assembly:

Step 1: Take out the cardboard middle of the spool

Step 2: Put one side aside for now and lay the other honeycomb-textured-side-down

Step 3: Align the main treat holder's textured side with the current top of the spool half and glue them together

Step 4: Grab the other side of the spool and lay it honeycomb-textured-side-down

Step 5: Insert hole cap part 1 like this: (Blue is hole cap part 1)

Step 6: Put the prong like parts of hole cap part 2 in the circular hole of hole cap part 1 (you'll here a snap) and rotate until it covers the part that sticks out of part 1 

Step 7: Put the connecters in the holes facing inwards on the spots highlighted in blue on the side of the spool of your choice

Step 8: Align the 2 sides of the spools so the connecters align and snap them together

Where do I put the treats?

Peanut butter in the textured parts and solid treats in hole in the center of it.