January 23, 2023
Description
Reinforced replacement for the shift pedal hinge for the Thrustmaster T300 racing wheel. It should be the same part for the T150. For a smooth operation print the hinge in 0.1 mm layer height. I additionally added a drop of grease.
Should also work for Thrustmaster TMX. Maybe also: Thrustmaster T150, T500, TS PC Racer ? (feedback is welcome)
Perimeters: 3
Infill: high 60-100 % for strength
Material: I printed in PLA
Layer height: the hinge shaft needs fine detail to run smooth. 0.1 mm
Supports: required
Print time: about 1 h per piece
License:
Creative Commons — Attribution — Noncommercial
misterT
