April 10, 2022
Description
Consider this a first revision of a keycap design i have been working on. I have found it necessary to begin anew with the knowledge from this version.
Printer:
Ormerod 2 528.4
Supports:
Yes
Resolution:
0.1mm
Infill:
n/a
Notes:
Due to my extruder design i have found it necessary to extrude 100mm filament between prints since the extruder would grind the filament to the point of failing to print.
Sanding
I used 240 grain "sanding cloth" from klingspor tied down to a 0.5L soda can to get a curvature that would be easy to attain with household tools.
License:
Creative Commons — Public Domain
9
improprietary
