Skeletor MK7 Strain Relief for Retro Glide V5

This remix modifies the Skeletor MK7 strain relief to make it compatible with Retro Glide V5.

Retro Glide V5 replaces the stock gantry system on the Creality K1 series with a linear rail setup, which slightly changes the cable routing and mounting geometry around the toolhead. Because of this, the original MK7 strain relief does not fit correctly. This remix adjusts the strain relief so it properly fits and functions with the Retro Glide V5 gantry.

Retro Glide V5 can be downloaded here:

https://cults3d.com/en/3d-model/tool/retroglide-v5-linear-rail-gantry-for-creality-k1-series

If you decide to download Retro Glide V5, you can use code "TBKMAKER" at checkout for 40% off.

This remix only replaces the strain relief. You will also need to download and install the Center arm specifically for Retro Glide V5. The duct used from the original Skeletor MK7 remains the same.

Make sure to download the original Skeletor MK7 files for the rest of the assembly.