DJI Mini 3 Case with remote and batteries + charger

Keep everything together and tidy at for long term storage at home and in a backpack.

That means all my accessories must be in one place. The generic triple charger space is meant to be used with a sponge to keep it in place and hold your batteries while on the go.

Important note: don't charge with the charger in the case, heat will build up, damage your batteries and eventually cause fires.

Improvement notes for remixers

I suggest trying to fit all these improvements together before I try it myself. Did not accomplish everything yet as designing this thing has been somewhat of a pain.

• Relocate the batteries at the top for and easier backpack access, horizontal placement could be acceptable and could help with ventilation as well.

• Add a snap-in locking system for the drone cap

• The same snap-in system should be used to secure the remote in the case

• Leave space for https://www.printables.com/model/64821-dji-mini-3-mini-2-air-2-air2s-lanyard-mount keeping in mind it needs both horizontal and vertical clearance (remote partially open with the raised antenna and flying cables)

• While you're at it, protect the controller sticks without unscrewing them