April 10, 2022
Description
Imprimer les trois pièces puis assemblez les avec 6 vis M3 la septième vis et coupé et collée sur le dernier coin .
Mettre une pièce dans le tiroir, prendre une clé et penchez le cube vers l’arrière pour que la pièce parte dans le coin. Entrez la clé pour simuler le transpercement de la pièce.
Retirez la clé et basculer vers l'avant pour remettre la pièce en place.
Ouvrir le tiroir et montrez la pièce intacte.
Print the three pieces then assemble them with 6 M3 screws the seventh screw is cut and glued on the last corner .
Put a coin in the drawer, take a key and lean the cube backwards so that the coin goes into the corner. Enter the key to simulate the piercing of the coin.
Remove the key and tilt forward to put the coin back in place.
Open the drawer and show the coin intact.
License:
Creative Commons — Attribution — Noncommercial — NoDerivatives