April 10, 2022
Description
Other models that I found gave too much wiggle room for the idler gear, so I decided to model my own and I'm really happy with it.
It's made for the X axis end idler from the prusa mk2 model.
Rafts:
No
Supports:
Yes
Infill:
40%
Filament:
The Cheapest Avaliable ABS
Notes:
I recommend printing it on it's side for more strenght.
The nut holes are tight, so the nuts may need to be hammered in place.
The hole for the idler was undersized a bit, so you will need to sand it until the idler gear fits.
License:
Creative Commons — Attribution
7
Juw
