Remade X and Y axis for the Smartrapcore

I really liked this X carriage (https://www.thingiverse.com/thing:1505842/files) because of the built in belt tensioner, but the files were (and still are) bad and could not be sliced properly (not water tight) also did not included a e3d v6 mount.

One thing leads to another and I remade the X carriage and the Y slide parts, replacing the 608 bearing for 3d printed ones, but you will need a 6mm smooth rod where the 3d printed idlers will spin on, a screw will chew them in no time.

I used this fan duct https://www.thingiverse.com/thing:3160328

Print Settings

Resolution:

0.2

Infill:

Filament: ebaycrap Use whatever works for you black

Category: 3D Printer Parts