April 10, 2022
Description
It's in 3 parts: top, bottom and a thread
Top and bottom parts are in two versions, with a flat roof and without it ('nobridge' - more space inside but may need printing with supports)
Bottom part is with additional 'stand' version with flat base if you want to have a standing box
---
It's a simplified version of Death Star Easter Egg Box
https://www.printables.com/pl/model/163711-egg-star-box
---
Printed with 3 walls
0.4mm nozzle
0.2mm layer hight
No need of supports unless printing 'nobridge' versions
'Stand' version may be printed upside down
If you will have problems with fitting a thread and egg parts you can try different size of it (f.e. 99% or 101% depending if it's too tight or to loose)
License:
Creative Commons — Attribution — Share Alike
9
C47_3d
