Plissee Klemmträger / Plissee window holder clip

I bought a bunch of OBI (German DIY store) plissees for my windows. They're great because you don't have to drill into your windows - but the holder clips seem to break every so often. In fact, OBI has switched to metal brackets by now.

If you have extraordinary thick windows, you can lengthen the clips as well.

Designed in SolidEgde, adapted in TinkerCAD.

One of my first self-designed models.

Edit, 5/23: Print on the side to improve strength. If you want to adapt the model, cut out the overlaps on the end piece (you can also do that in the slicer). It would make it easier to print and was originally only designed like that, because I had no idea what I was doing. The overlaps are just decorative and were supposed to mimic the original parts (which are injection molded).

Ich habe einige OBI Plissees gekauft, die kein Bohren/Schrauben erfordern. Leider brechen die Klemmträger des Öfteren. Die neueren Plissees von OBI werden mittlerweile auch mit Metallklemmen verkauft.

In SolidEdge designed, in TinkerCAD angepasst (Toleranzen…). Eines meiner ersten selbst-designeten Modelle.

Edit, 5/23: Auf der Seite liegend drucken, um die Stabilität zu erhöhen. Das Modell sollte am besten angepasst werden, indem man die überatehenden Ränder am Endstück weg lässt. Das geht auch im slicer. Im Modell ist es nur drin, damit es wie das Originalteil aussieht, die Ränder sind sonst ohne Funktion.