April 5, 2026
Description
A bitey fish that swims through sand! Not enough TTRPG enemies for sand dune encounters, so here is one more!
Scaled to fit on a 1 inch / 25.4mm circle base, but scale it up if you wish!
Prints without supports with FDM! 0.4mm nozzle at 0.08mm or 0.12mm layer heights provides fine results, but a smaller nozzle (0.3 or 0.2) will make the details better.
If you liked this model and want to show your thanks, you can buy me a coffee!
Category: AnimalsLicense:
Creative Commons — Attribution — Noncommercial — Share Alike
Clay Rade
