June 3, 2026
Description
Easy-to-print Frisbee Disc.
The Frisbee flies very stably and well through the air.
The holes in the Prusament disc make it ideal for short-distance use. The compact build makes it very travel-friendly. The size and good flight characteristics at short distances make it a perfect companion for the swimming pool or other places with limited space or crowds.
I've also uploaded the inner insert without a design so you can create your own. Feel free to send me your designs in the comments.
Disassemble the Prusament disc into three parts.
Simply use a screwdriver to push the locking tab to the side and rotate the core of the disc.
Place the outer ring flat on a table and press the Prusament disc into the printed part. The easiest way to do this is to start in one position, hold it there, and then press the disc in all the way around. The raised inner contour should be on the top. Place the insert in the middle flat on the table, insert the three hooks, and press them all the way down. Make sure the small locking mechanism engages!
The insert is designed to hold securely but can also be easily swapped out when printing multiple designs.
Easy-to-print frisbee without supports.
Material: PETG
Layer: 0.2mm
Infill: 15%
By request, I've created a plate that covers the coil's holes, allowing for longer distances. The plate weighs only 14g.
Simply place it on the coil with the locking tabs facing the coil and turn clockwise until it clicks into place. It can be removed by turning it back.
License:
Creative Commons — Attribution
11
Michael
