Doron Velta Sherpa Mini mount

The original extruder mount protruded from one corner, and used quite a lot of plastic. My version still uses the same mounting hardware but uses less plastic (and prints faster). You can flip the extruder and bring the bowden tube to the toolhead passing from the side of the printer if you don't use side panels.

BOM

• 2 M5x10

• 2 M5 tnuts

• 2 M3x14-18, threads into plastic

• 1 M10 PC4 bowden coupler, threads into plastic

make sure to fully seat the bowden tube all the way to the extruder exit to avoid any filament slop