Toilet Paper Holder For NEW Prusament Spool

Peak efficiency:

''Keep a close eye on your 3D printer, have toilet paper within arm’s reach, while the heated bed keeps your feet toasty''

-Very easy to print, no supports is needed.

-Printet in PLA 

-Layer height 0,20mm

-Infill 15%

-You'll need to print 2x Adapter Rings and 1x Roller

-The parts should be pressfit.

________________________________________________________________________________________________________________________________

Assembly:

Slide in the ''key'' and press down on the Adapter ring. 

Make sure the Adapter Rings is flush with the spool.

Make sure the Endstop is pointet outward to catch the Roller.

Repeat for both side of the spool.

Optional: For power rollers, add a dab of super glue on the ''key'' of the Adapter ring, for extra strength. 

Press in the Roller all the way down to the Endstop.

Reload.

Press the second spool half on.

Should fit most toilet paper.

Happy ''Printing'' !