Ubiquiti USW-Ultra 10-inch Rack Mount

Mod10 Rack Mount for Ubiquiti USW-Ultra

A 10-inch rack mount for the Ubiquiti UniFi USW-Ultra, designed for use in the Mod10 mini server rack (or any standard 10-inch rack).

This is a remix of @Mauker's design with improved tolerances, support-free printability, and a slightly beefier overall construction.

Important Note on Tolerances:

This is a tight tolerance design. Your printer needs to be producing accurate extrusion widths and your material shrinkage needs to be dialed in. If your machine is over-extruding or your filament shrinks more than expected, the switch may not fit. Tune your printer first!

Printing & Installation:

1. Print the mount. No supports needed.

2. Slide the USW-Ultra into the mount. It should be a snug fit.

3. Mount into your rack using standard cage nuts or M6 nuts (with Mod10 adapter inserts).

Hardware Required:

• Ubiquiti USW-Ultra: https://bhpho.to/3Q6JIbf

• 10-inch Mini Server Rack: https://www.printables.com/model/1225275-modular-10-server-rack-mod10

• PETG or ASA filament recommended: https://mrly.link/prusament

Files Included:

• USW-Ultra Rack Mount STL

• CAD (Fusion - F3D)

• CAD (STEP)

Recommended Print Settings:

• 0.2 mm layer height

• 4 perimeters

• 30%+ infill

• NO Supports Required

• PETG or Higher-Temperature materials recommended

Support My Work:

If you find this useful, please consider supporting my work: http://www.MandicReally.com/links

Buy Mod10 to mount your hardware in: