40ft Sea Container model at miniature scale (1:64)

Width is slightly increased compared to a true scale, to accommodate drawer slides and have enough space for 1:64 scaled car models.

Model features

• Replicates close to real dimensions at 1:64 scale

• Slide-in detailed front drawer with two car models wheels stop, drawer side handles have pre-made supports ready for printing.

• Container body with texture on all walls and the top

• Container print lines align with wall texture, making it look even better

• Containers are stackable

This model includes

• Slide-in drawer with wheel stops for two 1:64 car models (checked with HotWheels, Matchbox, miniGT, TimeMicro, etc.)

• Closed container body with pre-made supports for better adhesion (I ran into adhesion problems occasionally)

Print notes

• drawer looks much nicer when printed slower and at smaller layer height. I've tried as low as 0.12mm, however it will look ok at 0.2 layer height too

• I've provided model with pre-made adhesion corners to address potential adhesion issues

License

• Personal use only (non commercial).

My other 1:64 model cars compatible models