SKÅDIS Bucket Insert

This is a simple customizable insert for the little IKEA SKÅDIS containers to help organizing pencils, brushes etc.

The piece is solid and the desired partition can be created by playing around with the slicer infill pattern. I used the triangles infill, 0° infill angle and about 4 - 6% density respectively.

Make sure to set top and bottom solid layers to 0.

Set number of outlines/shells to 7 or more to make sure the two steps fuse right. I used the PrusaSlicer height modifier to set number of perimeters to 8 for height 0-4mm and to 3 for height 4-8mm.

Print Settings

Printer Brand:

Creality

Printer:

Rafts:

No

Supports:

Resolution:

280

Infill:

Filament: PrusaPolymers PLA

Category: Organization