fgc mkII upper with glock barrel adapter

I took the Barrel Adapter pieces from Louisthebeast glock adapter file and added them into the original upper and barrel retainer housing, making it a few less pieces and more durable as two pieces rather then 4. I added a little more thickness to the retainer inset piece as well as length giving a little more support for the barrel length wise. I also notched the back of the retainer were barrel sticks into chamber to keep from having to cut material out manually for barrel. Everything should be a nice snug fit. Minimum sanding or prep needed.

The first Barrel adapter I added a picatinny to the bottom side of it for flashlight and other accessories.

added a notched upper receiver if you choose to print his adapters, still saving from having to manually notch chamber wall.

Feedback is appreciated.

Print Settings

Supports:

Yes

Resolution:

Infill:

99-100%

Filament:

doesnt matter pla +

Notes:

Category: Sport & Outdoors