Gimli 5 Axes Wall Mount

This is a wall mount to support all 5 of Gimli's Axes in The Lord of the Rings. It is designed to support a lot of weight as the main shape slides down into the actual part that is mounted on the wall.

There is a channel dug to allow adding LED lights if you would like. I did a custom arduino with sound and leds... but something like a govee strip would work fine.

You may notice there are not pre-assigned spots for the little "holder" files because I wanted it to be flexible to accommodate any arrangement I wanted. You will need to print these all separately  and place them where you would like onto the mount with a strong epoxy. Also I only included 1 side, so you will need to inverse the X scale to mirror them as you need (In Bambu Studio, right click the model> Mirror> X axis). You'll need to likely print all the holders and match them to best hold your axes in whatever arrangement you choose. 

While this is intended for the United Cutlery Gimli Axes, I actually only own the UC Gimli "Bearded" Axe. My other 4 axes I 3d printed and made myself, so don't just blindly follow the placement I chose for the holders in case sizes are slightly different. You'll need place your axe on the mount (laying down of course) and decide where to place them to fit what you have.

The 3d models for the axes are done by Big Fred's Customs... https://www.etsy.com/listing/1375601568/gimlis-axes-kit

You can also see more of my process and finished result here: 
https://www.instagram.com/p/C2FauL8O_Z5
https://www.instagram.com/p/C2NdfNYulKf/