April 10, 2026
Description
This remix has a reduced the profile (X Axis) so it has a slimmer/narrower profile, it will fit into tighter spots, and corners. I have moved the mount holes to centre of the model, using 3.5x25 screws. And the bracket is good for a friction fit of the JetVM.
I have added a vast number of honeycomb chambers, vertical and horizontal for improved cooling.
No supports required. I used a 0.4,mm nozzle with 0.2 layer height. Infill was set to 25% and I used PETG.
License:
Creative Commons — Attribution — Share Alike
Grogg3D
