Giro Montaro visor screw

This is a M5 screw to replace the visor screw in a Giro Montaro. (probably works in other Giro helmets as well)

Rotate on your print platform to print screw head down.

Print, then use a M5 tap or M5 nut to cut threads in the shaft. You may also be able to directly screw it into your helmet. I used a M5 tap and it seems to work fine. It seems slightly loose- if this falls out I'll try just screwing it into the helmet and see what happens.

The solidworks file is included for your remixing fun.

Print instructions

Unassociated tags: Giro Montaro, giro visor screw, visor screw

Category: Sport & Outdoors Print Settings

Printer Brand: Prusa

Printer: i3 MK3

Rafts: Yes

Supports: No

Resolution: 0.15

Infill: 80%

Notes:

I printed in eSUN PLA+. I printed using a raft but it is probably not required if you have good bed adhesion.