January 13, 2020
Description
THIS DESIGN HAS BEEN STOLEN AND SOLD ON EBAY, AliExpress, Bangood etc.! PLEASE DO NOT SUPPORT SUCH SELLERS !
Once my Y-Axis Upgrade (https://www.prusaprinters.org/prints/5620-prusa-mk3-mk3s-y-axis-linear-rail-guide-upgrade) works great for me, I decided to have a stiffer and more robust X-Axis Carriage on my Original Prusa MK3 too.
So i've designed my own X-Axis Upgrade. You can follow me, or my MK3S with my Axis Mods on Twitch.
https://www.twitch.tv/dasschweigenderlamer
PLEASE READ THE UPDATE HISTROY BELOW
My Design works with Standard Firmware Calibration method. Easley mount the R4 Extruder to the new X-Axis base, no changes to the Extruder parts needed. There are three Back plates, one for the MK3/S, MK3S with MMU2s and another for Bondtech Extruders (added 10.04.2020).
I used the Prusa R4 Parts as Template but redesigned it from the scratch. The Design let you choose between two Versions:
My first Test are only with a 350mm MGN12 Rail and no Linear bearing on the existing Rod. The original Rod give more stability to the X-Axis and helps to align the Parts.
There’s is no need to cut the Rail, 350mm is a common size. It not as easy to shorten the Profiles because of their material hardness ;-)
The Guide Blocks are available in two sizes. It's important to use the longer 45mm Block.
After the assembly it is necessary to run at least the Z-Calibration.
Until now my prints with the new X-Axis went without any Problem. Just use enough grease to avoid friction. Movement are very silent now.
What You need:
X-Axis Extruder base:
1x M3x10
2x M3x14
4x M3x12 Countersunk
3x M3 Square Nut
3x M3 Nut
1x MGN12 Linear Sliding Guide Block (mostly in a Set with the Rail)
1x LM8UU (optional, you can use the one of the old Bearings)
X-Axis:
1x MGN12H Linear Rail Guides 350mm
6x M3x8
9x M3x18
1x M3x40
10x M3 Nut
1x M3 Lock Nut
3x M3 Square Nut
2x M3 Washer
1x GT2 Pulley 20 (optional, you could use the old Part, but not recommended)
4x LM8UU (existing Parts)
1x M3x35 (MK3S+ Style Tensioner)
The Rail and Rail block are available in different quality’s, just google for MGN12. My Parts are from a Chinese Shop and for around 15€ per Kit - it's a good Quality.
No further Problem, many prints are made with these Setup :)
Works for me so far !
If the Printvolume is maxed out (over 210mm), the x-back-R4CZ1.stl Part hits the original MMU2 Holder if there ! The modified part x-back-R4CZ2.stl will fix this issue (only fitted in CAD)
Added a Version of the X-Carriage to mount the Bondtech Extruder. New Files are: x-back-Bondtech-R4CZ2B.stl and x-front-Bondtech-R4CZ1B.stl + cad pictures. Hint: Unknown whether the LM8UU Bearing fits to this Version - untested !
THX@ Maker_Deezay for Testing !
Added a X-Motor-End with a "MK3S+ style belt tensioner".
i don't like it much, but some people ask for an alternative tensioner. Not tested until now, my mk3s+ has not arrived yet ;-)
Added a version with more space for the belts in the X-Carriage front part.
NEW Parts: x-front-r4cz2 / x-front-mmu2s-r4cz2
Update 12.02.2021:
Added NEW PARTS for HiWin Rails:
x-motor-end-R6CZ3-HiWin.stl
x-end-idler-R6CZ3-HiWin.stl
Added NEW PARTS with some improvements to the carriage
x-front-R6CZ3.stl
x-front-MMU2S-R6CZ3.stl
x-back-R6CZ3.stl (easier cable management)
I've reprinted my Extruder parts with Prusament PC Carbon Fiber black - it turns out extremely nice ! Just see the new pictures (last five).
added a Zaribo Orbiter Extruder x-carriage (x-front-R6CZ3-ZO-HiWin-ZOrbiter.stl). Use last “x-back-R6CZ3” as Backplate. Tested ! THX @ Metalek
I've printed the Parts with Prusament PETG Orange (nice Colour) and PETG Jet Black.
3-4 Perimeter
20-30% Infill
No Supports needed at all. Some Holes has a layer in there to avoid support. Just push the Allen Key through the Holes to free them up.
Update:
My parts now printed in Prusament PC Carbon Fiber black - best choice !
License:
Creative Commons — Attribution — Noncommercial — Share Alike
7
KalleKnall
