Prusament Upcycle sauces and dip roulette

Perfect for an evening with friends!

Easy-to-print sauce and dip roulette.

The outer ring is mounted on bearings and rotates smoothly.

The middle section does not rotate.

The middle insert can be removed for easier filling.

I bought the trays in stainless steel, but they could also be 3D printed. Please ensure that food-grade material is used.

6mm spheres are standard spheres for airsoft guns. However, any spheres with a diameter of 6mm can be used.

Bowls with lids

https://www.amazon.de/dp/B0DWXHSV61?ref=ppx_yo2ov_dt_b_fed_asin_title&th=1

Assembly:

Disassemble the Prusametspool into its two parts.

Simply use a screwdriver to push the locking tab to the side and turn the core of the disc. Only one side disc needs to be removed.

Place the "Bearing Bottom" flat on the table. Place 35 6mm pellets into the designated groove. Then press the "Bearing Top" onto the "Bearing Bottom" until it is fully depressed. The bearing is ready and can be placed on the Prusament spool. Place the outer ring flat on a table and press the Prusament disc into the printed part. The easiest way to do this is to start at one point, hold it there, and then press the disc in all the way around.

Have fun printing and playing!