Filmclip version 2 incl film hanger and squeegee

This version is based on the previous post: https://www.thingiverse.com/thing:3152983

These clips are more robust and rigid compared to the previous ones.

There are three versions:

Universal film clip that can be used for 135, 120 and equivalent film.

stl files:

a) film clip universal_1.stl

b) film clip universal_2.stl

The other one is made for 135 film and will hold the film by the sprocket holes.

stl files:

a) film clip 135_1.stl

b) film clip 135_2.stl

The third version is a film hanger than has minimal contact with your film, e.g. suitable if you are treating film strips. You may use it as hanger and/or as a weight (just make it heavier by adding a heavy screw and nut or equivalent). It may look a bit weak bit but, in my hands, the hooks are robust enough to hold a film and a weight.

stl file:

a) film hanger.stl

As a bonus I've provided a film squeegee. Glue the parts together and fit in a mini windshield wiper. You may alter the height of "film squeegee_3" so it holds the wiper firmly.

stl files:

a) film squeegee_1.stl

b) film squeegee_2.stl

c) film squeegee_3.stl

Additional material needed:

For the clips:

• You need the spring from a clothespin to put the two halves together.
• weight, e.g. 16 mm screw/M8 https://www.ebay.co.uk/itm/221301853865

For the squeegee

• Glue Loctite Super Glue
• Mini Windshield Wiper like https://www.biltema.se/bil---mc/bilreservdelar/torkarutrustning/stralkastartorkarblad/torkarbladsats-stralkastare-2000029603

Print Settings

Printer Brand:

MK3

Printer:

Rafts:

Doesn't Matter

Supports:

Resolution:

0.2

Infill:

Filament: Your choice PETG Your choice

Category: Camera