Metallica Lamp

The design has three parts:

• Case, printed in PETG black 0,3mm, 20% infill
• Inlay, printed in PETG red translucent, 0,15mm 100% infill
• Cover, printed in PETG black 0,3mm, 20% infill

Additional parts:

• 3x wood screw 3x10mm 
• 1x DC plug 8mm Diameter
• 50 cm Led strip 
• some hot glue

Assembly

Print the parts, place the inlay in the case and fix it with some hot glue at the edges.

Place the LED strip in the V shaped slots of the cover, do not use the adhesive tape of the strip. The strip is clamped by the slot. Place the DC plug and fix it with some hot glue. 

Wire up everything, place the cover on the back of the case and place the 3 screws.

Please post your make!