The Adorable Articulated Mini Gecko

Articulated Print-in-Place Mini Gecko

This fully articulated mini gecko prints in place and loves to hold onto anything it can grab. Cute, flexible, and weirdly satisfying to play with.

More models to print are available exclusively for my Patreon supporters

✨Join here to get access: https://www.patreon.com/kogi3d

ZIP file includes 4 versions:

• V1 – Single-color full gecko with eyes

• V2 – Multicolor gecko with 3D printable eyes

• V3 – Multicolor gecko prepared for 8mm glass eyes

• V4 – Single-color gecko with separately printable eyes

Multicolor / MF Files Note:
MF files are prepared specifically for Bambu Lab printers. Multicolor versions are designed to work with the AMS system and may not function correctly on other setups.

Recommended Print Settings:

• Printer Type: FDM

• Layer Height: 0.15 mm

• Infill: 10–15%

• Walls/Perimeters: 2

• Supports: ❌ Not required

• Brim: Optional (only if you have adhesion issues)

• Material: PLA recommended

• Nozzle Temp: 200–210°C

• Bed Temp: 50–60°C
  

All parts are optimized for support-free printing, so you can simply load them up and start printing without extra setup - just make sure your printer is dialed in for best results.

⚠ Scaling Notice:
This model is finely tuned for proper articulation at its original size. Scaling up or down may cause joints to fuse or become too loose, resulting in failed or limited movement.