Balloon Twist Table Lamp

A sculptural modern table lamp inspired by organic forms and architectural details. The shade takes the form of an organic balloon, with fine diagonal spiral ribs that wrap around the surface. The cylindrical base features a classic ribbed column design, with evenly spaced vertical flutes that give it a structured, architectural look. Clean, structured, and minimal — it provides a solid visual anchor for any shade in the modular system. Minimalist yet expressive, this lamp works as both a functional light source and a decorative home accent.

DIMENSIONS
• Shade: height: 170 mm (7.6 inch), width: 185 mm (7.3 inch)
• Base: height: 100 mm (3.9 inch), width: 82 mm (3.2 inch)

WEIGHT Depends on printing settings. Using the recommended settings: shade ~90 g, base ~130 g. 

FEATURES
• Print-ready and tested.
• Fits standard E26/E27 socket. 

• Mix and match filament colors for the shade and base to make it your own.
• Designed as a standard size and can be used as a replacement shade for most home table or pendant lamps (please check the measurements to ensure it fits your specific lamp).
• All lampshades and bases are part of a modular system (they are compatible with each other and can be combined in any configuration).

Use LED bulb ONLY.

A lamp cord with E26/E27 socket is required (not included) — available at most hardware or lighting stores (for example:
for the US https://amoz.onl/4yY, for Europe https://amoz.onl/4yW )

•• For personal use ONLY. Resale of files or printed objects is not permitted.••

PRINT TIME 

Depends on printer and print settings. For standard settings on a Bambu Lab A1: 

• Shade: ~3h
• Base: ~3h40m

PRINT SETTINGS (recommended):
• Shade: VASE MODE, layer height 0.2 mm, layer width 0.6 mm (I use nozzle 0.4 mm with extrusion width 0.6 mm), top layers 0, bottom layers 6.
• Base: standard mode, layer height 0.2 mm, layer width 0.4 mm, infill 15% (you can use from 5% but the base will feel lighter and less solid), top layers 5, bottom layers 5, 2-3 outer walls (perimeters).
• No supports needed.
• All STL files are already oriented properly (base should be printed upside-down).