Logitech C920 2020 Housing

Since i wanted a more sturdy mount for the Logi C920 i made my own version. The back is open so that heat can dissipate better. Slots for the wire is also made so that you can nicely route the cable out the back, through the feet and into an 2020 extrusion slot.  1 plate to mount everything solid so that it isn't heatcreeping over time.

You can angle the mount as you want and lock it in place with 2 M3x14 bolts on the sides. The mount is sticking out 5mm from the 2020 extrusions, so keep that in mind when mounting (maybe your panels needs spacing if used with one)

Everything can be printed without support, the lens cap needs to be glued in place afterwards.

Additional hardware required:

• 2x M3x5x4 heatset

• 2x M3x14

• 2x M3x12