Zonestar P802QR2 X Axis Mounts

Zonestar P802QR2 X Axis Mounts

In this remix I have:

1. Manually repaired the STL files so that they are now printable (The file I downloaded appeared to have some mesh issues and would not print correctly.
2. Optionally, I have modified both parts to make them stronger. The rear wall on both things have been increased by 2mm (you will have to adjust the X motor gear assembly position to adjust for the additional 2mm). I have also increased the thickness of the flange support web by 2mm. In the modified things I have increased the overall internal massing to make stronger where possible without effecting the functionality.

Print Settings

1. 0.2 resolution, 4 wall perimeters and 30 % infill. No support required.
2. I have printed at 210 to achieve better layer adhesion due to the orientation of the print.

Collection of all my upgrades for the Zonestar at the following link: https://www.thingiverse.com/thing:2936870

Category: 3D Printer Parts