shelter for weather station

My sensor was wrapped in a plastic bag and somehow during the winter it trapped a load of moisture and stopped working,even with new batteries..... so I put it in my printer enclosure for a couple of days,while the printer was working and that dried it out nicely.....

SO. Here we go

This is for a standard 50mm x 35mm x 100mm sensor or smaller

I made the body elliptical as a feature but it turns out that when you stand it on the base, with just a bit of a turn, it is firmly fixed.

pretty straight forward , how it fits together... I found that printing it on its side, you have less problems removing those pesky supports....