Logitech C270 Wall Mount (3D Printer Timelapse Bracket)

📸 Logitech C270 Wall Mount (3D Printer Timelapse Bracket)

Simple, sturdy wall mount for the Logitech C270 webcam—perfect for capturing clean timelapse footage of your 3D prints.

🧩 Overview

This is a compact wall-mounted bracket designed specifically for the Logitech C270. It holds the camera securely in a fixed position, making it ideal for consistent, repeatable timelapse shots of your printer.

I designed this to solve a common problem: getting a stable, permanent camera angle without tripods or makeshift mounts.

✨ Features

• 🎯 Perfect fit for Logitech C270

• 🧱 Rigid, stable mount (no wobble during long prints)

• 🪛 Wall-mounted with two screw holes

• 📦 Compact footprint – stays out of the way

• 🖨 No supports required

• ⚡ Quick print (~1–2 hours depending on settings)

🛠 Print Settings

• Material: PLA (PETG also works great)

• Layer height: 0.2mm

• Infill: 15–25%

• Walls: 3+

• Supports: ❌ None needed

• Orientation: Print flat on the back (as shown in photos)

🔩 Installation

1. Print the bracket

2. Mount to wall/enclosure using:

   • Wood screws, or

   • Drywall anchors (recommended for stability)

3. Slide the Logitech C270 into the holder

4. Adjust your camera angle before tightening everything down

🎥 Use Case: Timelapse Setup

This mount is designed to:

• Keep your camera fixed relative to the printer

• Avoid shifting between prints

• Provide a clean, consistent framing for timelapse videos

Works great with:

• OctoPrint timelapse plugins

• Obico / Octolapse

• Native slicer-based timelapse setups

⚠ Notes

• Designed specifically for the Logitech C270 — fit may not work for other models

• Friction fit is intentional; snug but not overly tight

• If your printer vibrates a lot, consider PETG for a bit more toughness

🧠 Design Notes

• Reinforced mounting holes to prevent cracking

• Slight tolerance added for easy insertion/removal

• Minimalist geometry to keep print time low and strength high

📷 Recommended Setup Tip

Mount slightly above or level with the print bed and angle downward for the best timelapse perspective.

👍 If You Like It

• Drop a like ❤

• Post your makes 📸

• Let me know if you want versions for other cameras