Single servo Twin arms - Remix

I love this design by Stuka87, but wanted a one piece "box" to fit over the servo as I try to avoid gluing things if at all possible. I also added some thickness to the two stop tabs on the top of the box to make it a little stronger as it would be printing in the Z direction instead of flat as in the original. The original arm was a little too small to fit on the servo post of the Tower Pro SG90 servo I had, so I enlarged the hole a bit in one of the arms (servo arm) to 4.8mm or 3/16". The other is exactly as the original as that fit perfectly (box arm). Print the box with support. The result was great and the arms moved very smoothly. Thanks again Stuka87 for a great design.

Print Settings

Printer Brand:

Creality

Printer:

Rafts:

No

Supports:

Filament: various PLA

Category: Electronics