Wall-Mounted Utility Hook (No-Drill)

Fully optimised for attachment using double-sided adhesive tape (e.g. 3M), allowing installation on walls, furniture or tiles without drilling holes.

Design Specifications

Flat base: Wide contact surface for maximum adhesion.

Geometry: The raised edge prevents objects from slipping.

Dimensions: Optimised for standard holes in mop and brush handles.

Recommended Print Settings:

Material: PLA, PETG or ABS/ASA.

Orientation: For maximum mechanical strength, we recommend printing the part on its side (this prevents the weight from causing layer separation).

Perimeters: 3 or 4 (to give the arm rigidity).

Infill: 20% (Helix or Grid).

Supports: Optional (if printed on its side, they may not be necessary depending on your printer’s bridge).