Modern Studded Cube Lamp, Easy Fast Print

This geometric table lamp features a cube-shaped lampshade with a distinct studded texture that adds a tactile, industrial dimension to its clean lines. This minimalist piece combines a playful grid pattern with a solid silhouette, inspired by Retro-Future and Pop Art style.

Easy and fast prints in PLA, no supports needed, the shade is fully optimized for vase mode.
Shade and base are easy to assemble without glue.

DIMENSIONS
• Shade: height: 178 mm (7 in), width: 177 mm (7 in)
• Base: height: 85 mm (3.3 in), width: 150 mm (5.9 in)

WEIGHT
Depends on printing settings. Using the recommended settings: shade ~110 g, base ~110 g. 

PRINT TIME
Depends on printer and print settings. For standard settings on a Bambu Lab A1:
• Shade: ~3h 10m
• Base: ~3h

FEATURES
• Print-ready and tested.
• Fits standard E26/E27 socket.
• Mix and match filament colors for the shade and base for a personalized look.
• Designed as a standard size and can be used as a replacement shade for most home table or pendant lamps (please check the measurements to ensure it fits your specific lamp).
• All lampshades and bases are part of my modular system (they are compatible with each other shades and bases from my profile and can be combined in any configuration).

Use LED bulb ONLY.

A lamp cord with E26/E27 socket is required (not included) — available at most hardware or lighting stores (for example:
for the US https://amoz.onl/4yY, for Europe https://amoz.onl/4yW )

•• For personal use ONLY. Resale of files or printed objects is not permitted.••


PRINT SETTINGS (recommended):
• Shade: VASE MODE, layer height 0.2 mm, layer width 0.6 mm (I use nozzle 0.4 mm with extrusion width 0.6 mm), top layers 0, bottom layers 6.
• Base: standard mode, layer height 0.2 mm, layer width 0.4 mm, infill 15% (you can use from 5% but the base will feel lighter and less solid), top layers 5, bottom layers 5, 2-3 outer walls (perimeters), fuzzy skin. (Warning! Do not apply fuzzy skin to the threaded parts of the base. You can also print the entire base without fuzzy skin).
• No supports needed.
• All STL, 3MF files are already oriented properly (base should be printed upside-down).