Belt Buckle Clip – With & Without Orthodox Cross (TPU or PLA) – 34 mm Height

This simple yet effective clip slides onto your belt from the back and securely holds large decorative belt buckles in place — keeping them centered and preventing them from sliding around.

Height: 34 mm

Two Variants Included:

• With Orthodox Cross (Orthodox belt clip.stl) — Features a beautiful raised three-bar Orthodox cross on the front. Perfect for monastic belts, Orthodox Christian belts, or anyone who loves traditional religious symbolism.

• Without Cross (Gürtel Clip.stl) — Clean, smooth, and neutral version. Ideal for Western buckles, cowboy belts, gothic, cosplay, or any large buckle.

Recommended Materials:

• TPU (85A–95A) — Best choice! Flexible, grippy, extremely durable, and comfortable for daily wear (shown in the photos). It holds the buckle firmly but is easy to slide on and off.

• PLA — Also possible! Great if you prefer a stiffer clip or don’t have TPU. Use 4–6 perimeters (walls) and 40–60 % infill for better strength. PLA prints cleaner and easier but is less flexible.

Printing Recommendations (both materials):

• Layer height: 0.2 mm

• Supports: None required

• Orientation: Flat on the build plate

• For TPU: 25–40 % infill (Gyroid or Cubic recommended)

• For PLA: 40–60 % infill

How to Use: Simply slide the clip onto your belt from behind, then place your large buckle in front of it. It holds heavy decorative buckles reliably in position.

The photos show the printed part in black TPU (shiny finish) and the clip mounted on a belt with an Orthodox cross buckle.

If you need a different height, width, or a reinforced version — just leave a comment!