Shower Drip Tray

This Shower Drip Tray rests on any flat surface in your shower or bathtub to allow the bottom of your shampoo bottle and other bathing products to dry out between uses. When these items are placed directly on a surface that gets wet, they normally stay wet, and mold has the perfect environment for growth. Don't let that happen - use this Shower Drip Tray!

The following photo shows a Shower Drip Tray ready for service:

The following photo shows a Shower Drip Tray in use:

The following render shows the print orientation of the Shower Drip Tray:

The following render shows the Shower Drip Tray flipped over for use - allowing water to evaporate and keep your bathing products dry:

The following render shows a closeup of the Shower Drip Tray flipped over for use - with the ridges on the bottom to allow water to evaporate:

To allow modifications, I have provided a STEP (.stp) file.

3MF files have been provided for Bambu Studio (has "-Bambu" in the filename) and for Prusa Slicer (has "-Prusa" in the filename).

The Shower Drip Tray seen in the photos was printed with White Sunlu PETG with a 0.4mm nozzle at 0.20mm layer height. Supports and brim are not needed and should not be used.

Be sure to check out my other designs - including universal key covers and a diverse collection of household accessories and 3D printing tools - on Printables at https://www.printables.com/@PhilCaruso/models AND on MakerWorld at https://makerworld.com/en/@PhilCaruso