March 19, 2023
Description
A simple fan bracket to hold a 40mm fan in place against the heatsink of a Mellanox Connectx-2.
Uses M3x12 SHCS or M3x16 SHCS.
Keep in mind that you're (most likely) printing this in thermoplastic. If you pick a filament with a low HDT like PLA, you run the risk of screws falling out due to the bracket softening from the heat. Use this at your own risk.
I printed mine in ABS.
License:
Creative Commons — Attribution — Noncommercial — Share Alike
Citruspers
