Shaper Bench Pilot MFT Foot

When working on long pieces, the 20mm frame is limiting the thickness of the pieces.

With 4 feet like these, we can use the MFT table as the frame.

Installation

• make sure the locking pins from the left and right arms are in place before moving the assembly to prevent misalignment.

• screw the feet to the Bench Pilot arms

• slide them on the MFT

• lightly screw the long M6 bolt.

Parts from McMaster

• 12x 90591A151 Steel Hex Nut, Class 8, M6 x 1 mm Thread,

• 4x 91290A332 Steel Socket Head Screw, M6 x 1 mm Thread, 30 mm Long

The feet can be used with the existing frame and its own feet, but the arms are ~8cm farther back.