SKR V1.3 Case for MPCNC

** Added Bottom that will hold a 15mm thick fan.

** Added lid with V1 Engineering logo

I increased the size of the hole for the wire entry and shrunk all bolt holes to 2.75mm for direct fit of 3mm hardware. Also created a basic flat top without the TFT mount. I used a separate case to remotely mount the TFT screen for freedom of movement around the machine. This can be found below:

https://www.printables.com/model/169773-bigtreetech-tft35-v2-magnetic-case

Here's a link to my Marlin v2.0.5.3 branch for the BTT SKR 1.3 w/TMC2208 stepper drivers running the MPCNC with Dual Endstops. This is ready to build in PlatformIO.

https://github.com/cmenard/Marlin/tree/MPCNC_SKR1.3_v2.0.5.3

Print Settings

Printer Brand:

MakerGear

Printer: 

MakerGear M2

Rafts:

No

Supports: 

Yes

Resolution:

.25

Infill: 

50%

Filament: IC3D ABS Grey

Category: Parts