Pleated Globe Table Lamp, Vase Mode, No supports

A compact desk lamp with a smooth ribbed globe shade that softly diffuses light through fine vertical texturing. The geometric base features a faceted hexagonal body. This design combines minimalist geometry with tactile details, perfect for both 3D printing enthusiasts and contemporary interiors. Inspired by soft minimalism and Japandi style.

Easy and fast prints in PLA, no supports needed, the shade is fully optimized for vase mode.
Shade and base are easy to assemble without glue.

Get a commercial license to sell physical prints and access premium lamp files on my Patreon. If you enjoy my free designs and want to support my work so I can create more, you can do that there as well.

DIMENSIONS
• Shade: height: 170 mm (6.7 in), width: 186 mm (7.3 in)
• Base: height: 120 mm (4.7 in), width: 94 mm (3.7 in)

WEIGHT
Depends on printing settings. Using the recommended settings: shade ~90 g, base ~120 g. 

PRINT TIME
Depends on printer and print settings. For standard settings on a Bambu Lab A1:
• Shade: ~3h 20m
• Base: ~4h

FEATURES
• Print-ready and tested.
• Fits standard E26/E27 socket.
• Mix and match filament colors for the shade and base for a personalized look.
• Designed as a standard size and can be used as a replacement shade for most home table or pendant lamps (please check the measurements to ensure it fits your specific lamp).
• All lampshades and bases are part of my modular system (they are compatible with each other shades and bases from my profile and can be combined in any configuration).

PRINT SETTINGS (recommended):
• Shade: VASE MODE, layer height 0.2 mm, layer width 0.6 mm (I use nozzle 0.4 mm with extrusion width 0.6 mm), top layers 0, bottom layers 6.
• Base: standard mode, layer height 0.2 mm, layer width 0.4 mm, infill 15% (you can use from 5% but the base will feel lighter and less solid), top layers 5, bottom layers 5, 2-3 outer walls (perimeters), fuzzy skin.
• No supports needed.
• All STL, 3MF files are already oriented properly (base should be printed upside-down).

Use LED bulb ONLY.
A lamp cord with E26/E27 socket is required (not included) — available at most hardware or lighting stores (for example:
for the US https://amoz.onl/4yY, for Europe https://amoz.onl/4yW )

•• For personal use ONLY. Resale of files or printed objects is not permitted.••