Pleated Planter

PArametric pleated planter. The full size is 120mm height with around 141mm diameter. The model showed in the pictures are scaled down to 70mm height.

The model is a solid block. To print it you have two options:

Option #1: Configure to zero thickness top walls and 0% infill. Use 3 to 5 side walls and bottom walls. This option will result in a stiffer vase, but with more material usage and a longer print.

Option #2: Use the vase mode (spiralize outer contour). This will create a single line wall on the bottom and the sides of the vase. Using this option will result in a more delicate vase, but with very little material usage and in a short time print.