Holder for AliExpress USB to M.2 adaptor with screwdriver storage

Holder for AliExpress USB to M.2 adaptor with screwdriver storage. Gives a base for more convenient use.

This was not designed to be a case for the whole thing (i.e. with a drive attached), but a simple base/holder to hold it while in use and hopefully not get any shorts (I have a few devices which need SATA M.2 drives and I made this for my own convenience).

Requires 2 M2*4mm self tapping screws.

Designed to fit this adaptor on AliExpress... https://www.aliexpress.com/item/1005006384591826.html

Print Settings...

• Material - I printed in PLA, but could really be anything,

• Layer heignt 0.2mm (0.3mm first layer),

• Temperature 200°C / 60°C bed,

• Supports - No,

• Raft - No,

• Printer Used - Ender 3 original.