Mirror frame or stand for IKEA LÖNSÅS with place for makeup and brushes

A Frame, holder or Stand for IKEA LÖNSÅS. I created it using FreeCad and the result is really practrical.

• Can be mounted directly and flush on the wall, because there is a gap for the screw head, so it fits betweens the mirror and the holder.

• Print in Place and no supports needed. (Use a brim and make sure adhesion is good)

• There is a place to store brushes or other stuff.

• It fits the LÖNSÅS perfectly. (There is a gap for that)

• PLA is perfectly fine - no fancy material needed.

• It is under 23cm high. If you need it to be smaller for you printer you can just size it down a bit in the Z direction.

• The Lonsas Mirror is easily available, cheap and still has a good enough quality and therefore it is just a good choice for such projects.

15% Infill with 2 perimeteres is definetly enough.